Home > 80% Lower Receivers >

SKUNK Series UFS Gen. 4 .308 80% Billet Lower-Closed T Guard-Black Anodized

80% Lower Receiver


 
Alternative Views:


Our Price: $159.99
Sale Price: $139.99
Savings: $20.00

Quantity in Stock:6
Availability:: Usually Ships in 2 to 3 Days
Product Code: UFS_LOWER_BLACK_308_SKUNK
Qty:

Description
 
UFS .308 SKUNK LOWER


THE UFS SKUNK LOWER IS A SPECIALTY SERIES LOWER THAT HAS MANY ENGRAVINGS DEALING WITH THE SKUNK. THIS RESEMBLES IT'S BETTER KNOWN COUSIN, THE HONEYBADGER. THERE WERE ONLY 10 OF THESE LOWERS MADE, SO GET YOURS WHILE THEY LAST. THE ENGRAVINGS ARE NOT PAINTED AS SHOWN IN THE ABOVE PHOTOS. WE DID NOT PAINT THE ENGRAVINGS DUE TO THE FACT ONE MAY WANT TO CUSTOMIZE THEIR COLORS.





Disclaimer: We take no responsibility for what any customer may fabricate out of our cnc machined parts. At this point these parts are completely useless, unless fabricated further by the purchasing customers. We do not encourage or condone our customers to make firearms, firearms parts, or any other weapons out of our machined parts. The purchasing customer is taking 100% responsibility and acknowledging the fact that this is just a cnc machined metal part or in other words a paper weight.

Other uses for this machined part:
Paper weight
Boat Anchor
Center piece
Art
etc...

We have just brought out the Gen. 4 UFS .308 Lower receiver. THIS MASTERPIECE IS SURE TO MAKE EVERY GUN BUILDER/AR ENTHUSIAST ECSTATIC. THIS RECEIVER HAS A BEEFED UP DESIGN AND FLOWS JUST AS OUR MULTI CAL VERSION DOES. THIS IS A GEN 1 DMPS STYLE LOWER AND WILL FIT MOST DPMS STYLE UPPERS. ALL ANODIZED LOWERS ARE TYPE 3 HARD COAT. ALSO, AS ALWAYS ALL OF OUR LOWERS/JIGS ARE 100% COMPLETELY MANUFACTURE IN THE USA!!


GEN 4 IMPROVEMENTS/FIXES ARE AS FOLLOWS:

-WE HAVE ADJUSTED THE FCG LOCATION TO WORK OR MATE BETTER WITH MOST TO ALL DPMS GEN1 STYLE UPPERS.

-WE HAVE FIXED THE LAST ROUND HOLD OPEN PROBLEMS THAT WERE OCCURRING ON CERTAIN BRANDS OF MAGAZINES. THE BOLT CATCH WILL NOW HOLD BOLT OPEN, NO MATTER WHAT MAG IS USED.

-TRIGGER GUARD HAS A NEW DESIGN/LOOK

-OVERALL THIS IS A MORE EFFICIENT AND FUNCTIONAL DESIGN AS COMPARED TO ALL OTHER PREVIOUS GENERATIONS.





THIS RECEIVER WILL GO WITH .308 OR 7.62X51 NATO.


The UFS
Gen. 4 ar-10 .308
black anodized 80% closed t guard lower receiver is the nicest design on the market, bar none. This is a new design and it is taking the market by storm. The UFS 80% lower is made from T6 aluminum stock billet and is 100 percent CNC machined. Also, we have the absolute best prices on the market when selling our CNC billet lowers. If you take a look at the photos you will see the added reinforcement and designs that blow the competition out of the water. Please get your while supplies last.

-Buffer Tube THREAD – Mil Spec 1-3/16-16 UN



As always, all of our lowers / Jigs are 100% completely
MADE AND FABRICATED IN THE USA!!




WE CAREFULLY INSPECT EVERY RECEIVER BEFORE SHIPPING TO MAKE SURE OUR QUALITY IS UP TO PAR.

ALSO, PLEASE INSPECT YOUR 80% LOWER RECEIVERS BEFORE PERFORMING ANY MODIFICATIONS (MILLING,DRILLING,MACHINING). AFTER THE 80% LOWER HAS BEEN MODIFIED WE WILL NOT BE ABLE TO PROVIDE A REFUND OR REPLACEMENT FOR ANY ISSUES REGARDING THE 80% LOWER RECEIVER.

Share your knowledge of this product. Be the first to write a review »